Wall switch sensors - Line voltage (Main series)

[ Main Series ]

Description

The wall switch sensors – line voltage series are commercial level occupancy sensors designed to provide maximum energy savings in a format that will complement any decor. they are designed with contractors in mind. The circuit passive infrared (PIR) switch can be single or dual pole and installs quickly in a standard wall box. It can also incorporates a neutral connection if needed.

Vacancy or occupancy mode is easily selected. As it uses PIR technology, this sensor is highly resistant to false ON events.
These occupancy sensors are available with a simple passive infrared circuit (PIR) or with a dual technology (DT) combining passive infrared circuit (PIR) and ultrasonic technology.
Light Level Sensor Mode: Each unit includes an adjustable light level sensor to hold off artificial lighting when adequate natural light is present.
Walk-Through Mode: To maximize energy savings, the sensor detects when areas are briefly occupied as a result of a person walking through and turns OFF lighting based on a shorter time delay.
They requires a direct line of sight to room occupants.

Caractéristiques

Illumination Range	Passive Infrared (PIR): 1 to 31 footcandles (10.76 to 333.68 lux) Dual Tech (DT) [PIR + Ultrasonic]: 1 to 250 footcandles (10.76 to 2690 lux)
PIR Sensitivity	Passive Infrared (PIR): 60 to 100% (adjustable setting) Dual Tech (DT) [PIR + Ultrasonic]: PIR: 60 to 100% (adjustable setting) Ultrasonic: 20% to 100% (adjustable setting)
Power Input	120 to 277VAC, 50/60Hz
Load for Both Circuits	120VAC: 660VA Standard Ballast 600VA Electronic Ballast/CFL/LED, 1000W Tungsten 1/6 HP Motor 277VAC: 1520VA Standard Ballast
Standard	UL

Manual and Auto-ON Modes
Occupancy and Vacancy Modes
Adjustable precise time delay via dip switches
- Passive Infrared (PIR): 30 s to 20 min
- Dual Tech (DT) [PIR + Ultrasonic]: 30 s to 30 min
Option with neutral wire if needed