Skip to main content

[ SÉRIE AVANCÉE]

Description

The CRISTALCONTROLS low voltage decorator wall switch provides an attractive companion wall station for a CRISTALCONTROLS low voltage sensor system. Many spaces now require by code (e.g., ASHRAE 90.1, IECC, Title 24) either manual on or partial-on user operation in addition to an occupancy sensor providing automatic off control. The simplest way of achieving this is by adding a low voltage wall station that interfaces with the power pack controlling the rooms lighting. Adding a switch to a low voltage sensor system also enables user’s to override a space’s lighting off if necessary. Functioning as a momentary two-wire style switch, this wall station is intuitive to use and provides pleasant tactile feedback. Visually, the unit matches the CRISTALCONTROLS line of wall switch sensors ensuring consistent style across multiple spaces on a project. Additionally, there is an integrated locator / Pilot LED with multiple color and intensity settings.

The CRISTALCONTROLS low voltage decorator wall station functions as a standard two-wire momentary switch. Typically, it is utilized along with any CRISTALCONTROLS power pack with the auxiliary switch input option (e.g. model CC-SWX-900-AX). Using a three-conductor low voltage wire (typically 18 AWG), low voltage power and common is wired from the power pack to the switch. The switch output is then wired back to the power pack’s auxiliary switch input. For applications requiring Vacancy (e.g., Manual On) operation, the switch signals the power pack to turn on lighting after the unit’s button is pressed. For Partial-On (e.g., Automatic On to 50% Level), the switch signals a power pack with a 0-10V dimming output (e.g. model CC-SWX-900-AX-D2) to increase the lighting level from the initial Automatic On level to the 100% level. Pressing the switch again would override lighting off. For multi-way switching applications, simply wire units in parallel to the power pack(s). The switch’s LED can be wired as a pilot light or as a locator and can be configured either white or blue and at mult intensities.

Features

Operating voltage 5-24 VDC
Current draw 2mA
Operating temp -10°F to 122°F (14°C to 50°C)
Relative humidity 0-95% Non-Condensing, Indoor Use Only
Size 2.74”H x 1.68”W x 1.39”D (6.96 x 4.27 x 3.53 cm) Fits Decorator Switch Plate Opening
Depth in wall 0.94” (23.88 mm)
Weight 2.5 oz
Mounting Single Gang Switch Box
  • Decorator Style Fits Common Wall Plates (not included)
  • Less than 1” Depth in Wall
  • Multiway Switching Capable (e.g., 3-way, 4-way)
  • Intuitive Operation with Minimal Force Required
  • Quiet and Pleasant Tactile Feedback
  • Matches SWX Wall Switch Sensor
  • Locator / Pilot LED with Adjustable Color & Intensity

Applications

A wall station can be added to any space where a low voltage control system is used. Energy codes require either Manual On or Partial On to 50% for many spaces such as:

  • Private office
  • Open office
  • Conference Room
  • Classroom
  • Storage Room
  • Break Room

Resources

Datasheet

Datasheet
English
690.56 kB

Related Products