Description

The LS-Slave by Cristal Controls allows you to control relays from the BACnet network. A LS-Slave card has 8 relay outputs. Four types of input are available: 0-5 VDC, 4-20 mA, external temperature sensor (-43 °C to 50 °C) of the NTC 10K type and a temperature sensor (10 °C to 60 °C) of the NTC 10K type (see 5.4 for the supported curve). A modulating output is present on the card but is not used in this programming.

Features

Microcontroller Freescale MCF51QE128
Communication RS-485 / BACnet MSTP
Supply voltage 18 – 28 Vac « Half Wave »
Power supply 40 mA typique, 50 mA max
Operating temperature 10 ºC à 45 ºC (50 ºF à 113 ºF)
Storage temperature -30 ºC à 80 ºC (-22 ºF à 176 ºF)
Ouputs
8x Dry contact: 1A @ 24Vac / 30Vdc
1x Analog 0-10Vdc protected @ 5mA
Inputs
1x Analog 0-5 Vdc in an impedance of 30k Ω
1x Analog 4-20 mA
1x NTC 10 KΩ thermistor input (10 ° C to 60 ° C)
1x NTC 10 KΩ thermistor input (-43 ° C to 50 ° C)
Jumpers
JP2: RS-485 termination of 120Ω
JP1: For future use
Switches 4x 8-position DIP switches
Dimensions 3.8 ″ x 6.4 ″ (96.52mm x 162.56mm)

Applications

The LS-Slave card is used as input / output without output management logic. It allows a BACnet controller to use its inputs and outputs to control different components connected to the LS-Slave. The LS-Slave can be configured so that it closes its output in the event of loss of communication.

Resources

Datasheet

Datasheet
Français
883.21 kB
Datasheet
English
875.42 kB

Related Products